SUREFIT® PERFORMANCE GUIDE

Developed to fine-tune Titleist metals on tour, SureFit Hosel and SureFit CG provide our expert fitters with an industry-leading capability to optimally fit every golfer.

Surefit

SureFit Hosel

The SureFit® Hosel features a sleeve and ring, each with four settings. The sleeve settings are numbered 1, 2, 3, 4, and the ring settings are lettered A, B, C, D. There are 16 unique loft and lie angle combinations.

Adjusting the SureFit Hosel

Insert SureFit wrench into hosel screw and rotate counter-clockwise until hosel becomes loose, move adjustment ring to the desired setting, and tighten clockwise until you feel and hear the wrench “click”. If the screw feels like it is binding, stop and realign components.

Important Notes

  • GT, TSR, TSi, TS, 917, 915, 913 and 910 driver shafts are interchangeable.
  • GT, TSR, TSi, TS, 917, 915 and 913 fairway shafts are interchangeable.
  • Titleist Driver & Fairway SureFit Hosels adjust in .75° loft and lie increments.
  • Titleist Hybrid SureFit Hosels adjust in 1° loft and lie increments.
Titleist SureFit Titleist SureFit Titleist SureFit Titleist SureFit

Performance Fitting Guides

Start in the standard position: A•1 (RH) or D•4 (LH).

Move up or down in the grid to adjust trajectory.

Move left or right in the grid to fine-tune direction.

+/- .75° denotes driver/fairway settings; +/- 1° denotes hybrid setting.

For best results, see an authorized Titleist Fitter.


*LOFT = EFFECTIVE LOFT with a square face at impact.

The Fastest Way To Better

Experience a Tour-quality Titleist club fitting that can provide immediate benefits for your game.

Schedule Your Fitting

Fitting Headweight

The following chart is an overview of the swingweight changes associated with changing the length of clubs. Note that the shaft balance point and grip will alter swingweight as well.

WEIGHT

TSR1
(Driver/Fairway/Hybrid)

GT2
(Driver/Fairway)
GT3
(Driver)
GT3
(Fairway)
-6g 3g (White) 3g (White)    
-4g 5g (Green) 5g (Green) 4g (Green) 8g (Green)
-2g 7g (Gray) 7g (Gray) 6g (Gray) 10g (Grey)
STD 9g (Red) 9g (Red) 8g (Red) 12g (Red)
+2g
11g (Black) 11g (Black) 10g (Black) 14g (Black)
+4g 13g (Blue) 13g (Blue) 12g (Blue) 16g (Blue)
+6g
15g (Copper) 15g (Copper) 14g (Copper) 18g (Copper)


GT4 Front CG (Default) Ultra Low Spin
 Back CG “2.5” Spin
Desired Headweight Forward Weight Back Weight Forward Weight  Back Weight
-6g 5g/-4 (Green) 3g/-6 (White)
3g/-6 (White) 5g/-4 (Green)
-4g 7g/-2 (Gray) 3g/-6 (White)
3g/-6 (White)
7g/-2 (Gray)
-2g 9g/STD (Red) 3g/-6 (White)
3g/-6 (White) 9g/STD (Red)
STD 11g/+2 (Black) 3g/-6 (White)
3g/-6 (White)
11g/+2 (Black)
+2g
11g/+2 (Black) 5g/-4 (Green)
5g/-4 (Green)
11g/+2 (Black)
+4g 13g/+4 (Blue) 5g/-4 (Green)
5g/-4 (Green)
13g/+4 (Blue)
+6g
15g/+6 (Copper) 5g/-4 (Green) 5g/-4 (Green)
15g/+6 (Copper)


SureFit Weight Options

Titleist Metals feature the ability to change the SureFit® weight in order to modify swingweight. Our fitting research shows that headweight has a significant influence on feel and that golfer preference was widely spread among all weights. The following table helps guide you to which SureFit weight may be used to achieve a swingweight close to our nominal swingweight.

CLUB LENGTH
MEN'S LADIES
1" Under +4g Std.
1/2" Under +2g -2g
Standard Std. -4g
1/2" Over -2g -4g
1" Over -4g -4g


Titleist SureFit

Surefit CG Weight Track Settings

GT3 metals feature SureFit® CG track technology, offering five unique positions to adjust club head CG to fine-tune ball flight with neutral, fade or draw flight.

SETTING T2
T1 N H1 H2
RESULT
More Fade Fade Neutral Draw More Draw
BEST FOR Toe Strike Pattern Toe Strike Pattern
Center Strike Pattern Heel Strike Pattern Heel Strike Pattern


WARNING

Read instructions completely before use.

The SureFit® wrench must be used to properly and safely adjust the performance of Titleist metals. Club components should be inspected frequently, before and during play, to ensure that all connections are tight. Keep the hosel connection area clean from dirt and debris at all times. This proprietary system is only compatible with genuine Titleist components and must NOT be used with components from other manufacturers. Failure to adhere to this provision may void the warranty and/or cause damage to the system. Failure to follow these instructions may create a situation where the clubhead could loosen or disengage from the shaft during a swing, possibly causing serious injury.

For more information, explore this website or U.S. consumers may also call Team Titleist at 1-888-TITLEIST. Titleist golf clubs conform to the Rules of Golf approved by the USGA and R&A. However, the settings on your golf club must not be adjusted during a round of golf. For complete rules information visit, www.usga.org or www.randa.org.